Tabbing wire solar panels as a solar photovoltaic cell industry midstream end products. Although the product is small, it has a great influence on the efficiency of the whole product. However, it has a great impact on the efficiency of the whole product. A good tabbing wire solar panels can improve the overall efficiency of the whole solar cell. So choosing a good manufacturer becomes essential. So how to transport and store the tabbing wire solar panels, and what is the standard of transport and storage requirements for tabbing wire solar panels?
Marking
Each roll, each disc and each shaft of the product should indicate:
a) Name and trademark of the manufacturer;
b) Product name;
c) Product specifications (external dimensions), coating grade;
d) batch number; e) product net mass (kg);
f) production date;
g) traceability bar code.
Each batch of products should have a product shipping inspection report card. Product conformity certificate. Issued to the demand side with the shipping bill. Indicate:
a) Name of the manufacturer, trademark;
b) Product name;
c) Product specifications (external dimensions), coating grade;
d) Net mass (kg) and quantity of the product;
e) inspector’s seal or signature;
f)Each test result and quality department seal;
g)Date of production/export;
h) Product implementation standards.
Packaging
For fixed length tinned soldering tape. Usually packed in paper discs or rolls.
For non-fixed length tinned tape. Usually packed in the form of I-shaft. There should be no joints. The coil should not be disordered. The spool line should be not less than 5mm from the inner edge of the spool plate.
Vacuum bagging is appropriate for all finished products of tin-coated soldering tape.
Transportation
The products should be transported to avoid collision, rain and moisture. During loading and unloading, the products should be loaded and unloaded lightly. Prevent bruises, abrasions and pollution. Strictly prevent falling and throwing. Do not press, do not squeeze and take shockproof measures.
Storage
The product should be stored in dry, clean, ventilated. No corrosive chemicals in a good warehouse. Relative humidity does not exceed 60%. The conditions. The shelf life of the product is six months and above.
