Photovoltaic Ribbon | Solar Ribbon | Solar tabbing wire | Solar busbar
Photovoltaic ribbon, also known as PV Ribbon or Solar Ribbon, is a hot-dipped tinned copper flat conductor that collects the current from the photovoltaic cells. It connects the individual solar cells and carries the generated current to the distribution system.
LEADING PV RIBBON SUPPLIER SINCE 2012
Raytron was founded in 2012 and started its business with the development of copper-rolled flat ribbon wire.
After 10 years of persistent efforts, Raytron has become the most professional manufacturer of high precision copper & copper-clad aluminum flat ribbon wire & strip in China and one of the very few manufacturers in China that can produce flat wire & strip with a width to thickness ratio of higher than 100 times and copper strip & flat ribbon wire with ultra-low yield strength below 110Mpa. High dimensional accuracy and straightness are also guaranteed.
With 10 high-precision 4-link rolling mills and an annual production capacity of 10,000 tonnes, Raytron is the largest manufacturer of rolled copper strips & flat ribbon wires for Photovoltaic Ribbon & Solar Busbars in China.
2012
Raytron was founded
2015
Awarded as China national high-tech enterprise.
2020
Become biggest PV busbar strip supplier in China.
2022
Annual production capacity expanded to 10000tons.
Looking for a Photovoltaic Ribbon supplier?
2 Types of PV Ribbon
Interconnect/Tabbing Ribbon | Bus bar Ribbon
TYPE 1
Interconnect ribbon /tABBING wire
Interconnect ribbon/Tabbing wire carries the generated current from all the PV cells to the bus bar.
Thickness
0.07mm-0.2mm
Width
1mm-3mm
Base Metal
Cu | Al | CCA
Solder Type
Sn; SnPb; SnAg; SnCuAg; SnPbAg; SnBi; SnBiAg
Type 2
BUS BAR/ BUSSING WIRE
Bus bar/ Bussing wire is the wire converging the accumulated current to the junction box or electrical distribution system.
Thickness
0.07mm-0.5mm
Width
3mm-6mm
Base Metal
Cu | Al | CCA
Solder Type
Sn; SnPb; SnAg; SnCuAg; SnPbAg; SnBi; SnBiAg
6 key factors for Choosing
PV Ribbon
PV Ribbon is the basic component of a photovoltaic system; therefore, its quality is very important for solar panels’ lifetime, function, and efficiency.
Material
The widely used base material of PV ribbon is CDA102 copper which offers at least 100%IACS conductivity. Different Aluminum alloys as well as Copper Clad Aluminum are also available.
Tin plating
Tin layer composition and coating thickness are important parameters that affect the solder strength and performance of the PV panels.
Yield strength
The yield strength is the minimum amount of stress required to permanently deform the PV Ribbon. It is an important parameter because if the yield strength of the PV Ribbon is too high, it can put a lot of stress on the panel itself and cause it to break.
Camber
To avoid missed bonds, PV ribbon must be straight without camber.
Elongation
High Elongation= High Ductility = High Module reliability
Winding
Minimize Camber, Aviod tangle, Maintain Yield Strength
Why Choose Raytron
Raytron was founded in 2012 and started its business with the development of copper-rolled flat ribbon wire.
After 10 years of persistent efforts, Raytron has become the most professional manufacturer of high precision copper & copper-clad aluminum flat ribbon wire & strip in China and one of the very few manufacturers in China that can produce flat wire & strip with a width to thickness ratio of higher than 100 times and copper strip & flat ribbon wire with ultra-low yield strength below 110Mpa. High dimensional accuracy and straightness are also guaranteed.
With 10 high-precision 4-link rolling mills and an annual production capacity of 10,000 tonnes, Raytron is the largest manufacturer of rolled copper strips & flat ribbon wires for Photovoltaic Solar Busbars in China.
Having any questions?
What you need to do is just to tell us how we could help. Your trouble will be handled by us.
Contact Raytron today.
Talk to our team now! All your messages will be replied within 24 hours.
